FUNCTIONS
- Cranking for power generation
- Charged by solar panel
- Charged by external adapter (optional)
- Digital display of frequency, 2 band: FM/AM
- Digital clock, timing power on
- Charge digital devices, mobile phone, etc.
- Lighting function
FEATURES
- Cranking for power and powered by solar panel, no external batteries are needed, store energy by built-in rechargeable battery; green, environmental friendly, economy, safety, (the common battery will leak easily), reuse limitlessly
- Low noise but high efficiency; Low power consumption; Long working time
- Digital display, convenient to handle, more accurate frequency
- Extra long antenna enhance the reception ability
- Simple outline and delicate appearance
MAIN TECHNICAL PARAMETERS
1) Radio:
| 1. Sensitivity of the FM | Better than 10 uV |
| 2. Sensitivity of the AM | Better than 3 mV/m |
| 3. Reception scope of the FM | 87-108 MHz |
| 4. Reception scope of the AM | 520-1620 KHz |
| 5. The audio frequency output power | 100 mW |
| 6. Radio working time after 1 minute cranking (2.5 – 3 circles/s) | 18-27 minutes |
| 7. Lighting time after 1 minute cranking (2.5 – 3 circles/s) | 27 – 36 minutes |
| 8. Speaking time after 3 minutes cranking for charging mobile phone (2.5 – 3 circles/s) | 4-15 minutes |
| 9. Radio working time after 1 hour charging under sunlight (SOOW/M*) | 20 – 30 minutes |
| lO.LIghting time after 1 hour charging under sunlight(500W/ ) | 23 一 32 minutes |
| 11.Max. Current flux of being charged by solar | 20mA |
| 12. T>me of being fully charged under sunlight
(500W/M7) 、 13. Radio working time after being fully charged |
35 – 42 hours 7-9 hours |
| 14. Lighting time after being fully charged | 4-6 hours |
| 15. Max. Luminous flux | 11-14LM |
2) Charged by outside power
| 1. Input voltage | 5-5.2V |
| 2. Charging interface | DC plug 03.553 |
| 3. Fully charged time | 6 – 8 hours |
3) Main parts life-span
| Switch | 5000 times |
| The whole unit | 5 years |
| The plastic part | 5 years |
4) Size and Weight
| Antenna length (external part) | About 37mm |
| Product size | Aboutl 56*76*58mm |
| Product weight | About 203g |
5) Others
| Specification of bullt-ln battery | 300mAh, 3,6v |
| Diameter of built-in speaker | 036mm (two) |
| Generator power | 5W |
OPERATION METHOD
-
-
- Cranking for power:
-
Unlock the handle, crank it at the speed of 2.5 to 3 circles per second. The faster you crank, the higher efficiency to charge.( It’s better to crank it for no more than 4 circles per second.)
-
-
- Charged by outside power:
-
Connect with the 5V adapter to charge the internal battery, and about 6~8 hours later it will be fully charged.
-
-
- Charge for digital devices, mobile phone, etc.
-
Connect this product with other digital devices via connection cable, unlock the handle, crank it at the speed of 2.5 to 3 circles per second. Illumination of charging indicator indicates that charge is working.
-
-
- Reception of radio:
- Operation of the power switch and volume adjusting: First make sure the power switch is at “ON” position. Turn the volume knob dockwise to increase the volume. Contrariwise, turn the volume switch anticlockwise can decrease the volume gradually, a “crack” sound will be heard to show power off.
- Wave band shifting : Push the wave band converting switch to choose FM, AM.
- Station Search: Observe the display screen while tuning and select the radio program you needed. Tune the knob to an optimal position in which the reception effect is the best.
- Use of antenna:
- . This product adopts telescoping antenna to receive signal for FM. When the signal is weak, you can
-
extend the antenna or change the direction of the antenna to find the optimal position, thus can improve the effect of radio. Whereas, shrink the antenna when the signal is strong.
-
-
- . It adopts built-in magnetic antenna to receive signal for AM. You can change the position of the product
-
property when the signal is weak.
Note:
- It is advised to turn the volume to the optimal position (be comfortable) when you listen.
- Avoid places like high building, basement, etc as possible as you can, such places will badly influence the effect of the reception. Leave far away from the induction cooker, fluorescent lamp, car generator, motor, computer or such electrical equipment that may disturb the signal easily.
- Time setting
- Local time setting
Press and hold the “Time set” button, then press the hour adjust button and minute adjust button to adjust time, after adjusting the time, release the button, the system will recognize automatically.
- Timing power on setting
Press and hold the ‘*Alarm set” button, then press the hour adjust button and minute adjust button to adjust time, after adjusting the power on time, press the **Alarm ON/OFF” button to confirm it.
Tips:
To turn on or to turn off the timing power on, press the “Alarm ON/OFF” button.
- Use of Background light
When at night, press the background light button for lighting. Lasts for 10 seconds.
- Earphone:Plug the earphone into the earphone jack, the speaker will be off automatically at this time. Be cautious of the things below when using the earphone:
- Adjusting the volume to proper position when listen, too loud or listen for a long time will affect your hearing.
- Please turn the radio off before sleep to avoid listening for a long time when you have fallen asleep.
- When driving or walking, in order to avoid potential danger, please do not use earphone.

