Lighting:
| The Max. Luminous Flux(0.5W SMD) | Z30 Lm |
| The Max. Luminous Flux(2 LEDs) | 26 Lm |
| Working Time after Fully charge (0.5W SMD) | z4 Hours |
| Working Time after Fully charge (2 LEDs) | HO Hours |
| Lighting Time after 1 minute Hand Crank Generate Power(0.5W SMD) | 210 Minutes |
| Lighting Time after 1 minute Hand Crank Generate Power (2 LEDs) | n20 Minutes |
Radio:
| FM Frequency Range | Better than 5 uV |
| Radio Time after Fully Charge | n5 Hours |
| Radio Time after 1 minute Hand Crank Generate Power | 210 Minutes |
| Output Charging Current | 250~400mA |
Siren Alarm:
| Siren Alarm Noise | > 120dB |
| Siren Alarm Working Time | n 70 Minutes |
| Siren Alarm Working Time after 1 minute Hand Crank Generate Power | n 2 Minutes |
Others:
| Specification of Built-in Battery | 3.7V, 480mAH Polymer Li Battery |
| Diameter of Built-in Speaker | <t»36mm |
| Motor | 2.5W |
| Input Voltage and Current | 5V and 0.45A |
| Output Voltage and Current | 5V and 0.4A |
| Fully Charge Time | Approx. 2 Hours |
Operation Method :
- Lighting: Press the “LIGHT” switch to turn on or off.
Radio: ” RADIO” Switch to turn on or off radio and adjust volume
“TUNING” Switch “+” or to select channel
SIRENsPress the “SIREN” Switch to turn on or off.
- Input Charge
A: Hand Crank Generate Power
Battery Power Key Switch On, crank at 2.5 or 3 cycles per second, indicator LED go on red when input charging
B: Built-in Type A USB
Battery Power Key Switch On, connect built-in Type A USB with AC Adaptor, PC etc., indicator LED go on red when input charging and go on green after fully charge.
- USB Output Charge
Battery Power Key Switch Off, Mobile or digital devices’ input USB cable connect with Item’s USB output Port that in bottom, crank at 2.5 or 3 cycles per second.
